DCS Remote Backup/Restore Instructions

__________________________________________________________________________________

Follow the below steps to use:

• First ensure you have DCS software 4.00 or greater installed on the TIU and Remote
• Connect the TIU to your computer via the 9 pin serial cable
• Connect the Remote and TIU together with the tether cable
• Power up the TIU via the Fixed 1 port
• Turn on the remote
• Select 'MENU' ->  'SYSTEM' ->  'REMOTE SETUP' -> 'REMOTE BACKUP' ->  Choose between load from or to PC.
• Start the DCS Remote Backup/Restore program
• If you plan to transfer data to the remote:
  • Select the 'Transfer Data to Remote' tab
  • Select browse then the file you want to load
  • Hit the Transfer button
• If you plan to transfer data from the remote to the PC:
  • Select the 'Transfer Data to PC' tab
  • Select browse then the location and filename of where you want to save the file
  • Hit the Transfer button

   

__________________________________________________________________________________

Return to the DCS Tips page